Fast delivery
Get in as fast as 1 hour
It’s all local
Shop your favorites
Direct chat
Connect with shoppers
About
Details
5/16 inch x 5-1/8 inch. RSS. UberGrade. Speedy lag bolt alternative with immense drawing power! T-30 bit included. AC257 treated lumber approved. IBC/IRC code compliant ESR no. 2442. Zero stripping: Recessed star drive. No splitting: CEE thread. Low torque: W-cut thread. No pre-drilling: Engineered zip-tip. Stronger than 1/2 inch diameter lag screws & twice as fast! Building code approved, limited lifetime guarantee Climatek all weather coating. www.icc-es.org. Visit (www.icc-es.org). Made in Taiwan.
Directions
Suggested Uses: Lag screw alternative; carrying beam; playground equipment; ledger board; deck posts; stair rails. RSS Shear Test Results: Fastener: 5/16 inch x 2-1/2 inch; Avg. Ultimate Load: 903 lbf, 5/16 inch x 3-1/8 inch; Avg. Ultimate Load: 840 lbf, 5/16 inch x 4 inch; Avg. Ultimate Load: 1196 lbf, 5/16 inch x 5-1/8 inch; Avg. Ultimate Load: 1314 lbf), 5/16 inch x 6 inch; Avg. Ultimate Load: 1326 lbf. Please note the above stated values are ultimate load, tested after ASTM D 1761, wood to wood connection. For construction design purposes an applicable safety margin should be applied. For safety factor requirements in your area contact your local building official, architect or engineer. Test conducted in wood with a specific gravity 0.42. Climatek coated screws evaluated with 0.40 pcf ACQ-D and 0.40 pcf CA-B. See ESR-2442 for actual recognized design loads.
Warnings
Failure to wear safety glasses with side shield will result in serious personal injury. Always wear Ansi compliant eye protection.
About
Details
5/16 inch x 5-1/8 inch. RSS. UberGrade. Speedy lag bolt alternative with immense drawing power! T-30 bit included. AC257 treated lumber approved. IBC/IRC code compliant ESR no. 2442. Zero stripping: Recessed star drive. No splitting: CEE thread. Low torque: W-cut thread. No pre-drilling: Engineered zip-tip. Stronger than 1/2 inch diameter lag screws & twice as fast! Building code approved, limited lifetime guarantee Climatek all weather coating. www.icc-es.org. Visit (www.icc-es.org). Made in Taiwan.
Directions
Suggested Uses: Lag screw alternative; carrying beam; playground equipment; ledger board; deck posts; stair rails. RSS Shear Test Results: Fastener: 5/16 inch x 2-1/2 inch; Avg. Ultimate Load: 903 lbf, 5/16 inch x 3-1/8 inch; Avg. Ultimate Load: 840 lbf, 5/16 inch x 4 inch; Avg. Ultimate Load: 1196 lbf, 5/16 inch x 5-1/8 inch; Avg. Ultimate Load: 1314 lbf), 5/16 inch x 6 inch; Avg. Ultimate Load: 1326 lbf. Please note the above stated values are ultimate load, tested after ASTM D 1761, wood to wood connection. For construction design purposes an applicable safety margin should be applied. For safety factor requirements in your area contact your local building official, architect or engineer. Test conducted in wood with a specific gravity 0.42. Climatek coated screws evaluated with 0.40 pcf ACQ-D and 0.40 pcf CA-B. See ESR-2442 for actual recognized design loads.
Warnings
Failure to wear safety glasses with side shield will result in serious personal injury. Always wear Ansi compliant eye protection.
Common questions
Learn more about how to place an order here.
Then, when you arrive at the store of your choice, use the Instacart app to notify us. Depending on the store, a shopper or store employee will bring the groceries to your car, or you can pick them up at the designated area.
Learn more about pickup orders here.
- Delivery fees start at $3.99 for same-day orders over $35. Fees vary for one-hour deliveries, club store deliveries, and deliveries under $35.
- Service fees vary and are subject to change based on factors like location and the number and types of items in your cart. Orders containing alcohol have a separate service fee.
- Tipping is optional but encouraged for delivery orders. It's a great way to show your shopper appreciation and recognition for excellent service. 100% of your tip goes directly to the shopper who delivers your order.
With an optional Instacart+ membership, you can get $0 delivery fee on every order over $35 and lower service fees too.
Instacart pickup cost:
- There may be a "pickup fee" (equivalent to a delivery fee for pickup orders) on your pick up order that is typically $1.99 for non-Instacart+ members. Instacart+ membership waives this like it would a delivery fee.
- Pick up orders have no service fees, regardless of non-Instacart+ or Instacart+ membership.
Learn more about Instacart pricing here.
You can set item and delivery instructions in advance, as well as chat directly with your shopper while they shop and deliver your items. You can tell the shopper to:
- Find Best Match: By default, your shopper will use their best judgement to pick a replacement for your item.
- Pick Specific Replacement: You can pick a specific alternative for the shopper to purchase if your first choice is out-of-stock.
- Don't Replace: For items you'd rather not replace, choose "Don't replace" to get a refund if the item is out of stock.
Learn more about instructions for specific items or replacements here.
- Missing items
- Incorrect items
- Damaged items
- Poor replacements
- Early/late orders
If an order never came, or you get someone else's order, you can reach out to Instacart Customer Experience.