Fast delivery
Get in as fast as 1 hour
It’s all local
Shop your favorites
Direct chat
Connect with shoppers
About
Details
1-1/2 Inch 16 Gauge. For model(s ). 3200-S16P. S200-S16, 900078NT. For best performance use only genuine Paslode staples. Medium crown staple paslode. Easy to drive! Less Jamming! Advanced chisel point design. ISANTA Member. Made in China.
Directions
Heavy duty staple & nailer operator safety instructions. While paslode has designed, produced and inspected all its tools with safety in mind, there are certain basic safety precautions precautions that should always be taken by the operator. These include: Never operate or work in the vicinity of a tool in use without hearing and eye protection devices, including side shields. (2) Never assume the tool is empty. Check the magazine. (3) Never engage in horseplay with the tool, it is not a toy. (4) Never point the tool at anyone or yourself, even if you think it is empty or disconnected. (5) Never operate the tool unless it is in contact with the work piece. (6) Never tamper with, disable, or remove the work contact element. (7) Never leave the work area for any extended period of time without disconnecting the tool from the air line. (8) Never attempt to clear a jam without disconnecting the tool from the air line and removing the remaining fasteners from the tool. (9) Never allow the air pressure to exceed the maximum marked on the tool. Check the air pressure gauge at least twice daily. Do not operate with bottled air or gases (10) Never operate a dirty tool: Clean the tool at least daily and lubricate. If required. (11) In case of tool malfunction: (a) Disconnect from air line immediately and remove all fasteners from magazine. (b) Turn the tool over immediately to the person responsible for repair, or a attach a tag to the air inlet indicating the tool should not be used. (c) Never re-connect to the air line until the tool is thoroughly repaired and inspected. (12) Never carry the tool with the trigger depressed. (13) Never clamp the trigger in a locked operating position. (14) Never load the tool with either the trigger or work contact element depressed. (15) Never use parts or fasteners other than those specifically designed and recommended by Paslode for use in the tool and the work to be done. (16) Never attempt to modify the tool in any way. (17) For detailed information on the tool installation, maintenance and loading Instructions, refer to the tool owners manual. (18) Treat the tool with respect and it will perform safely and reliably for you.
Warnings
Danger: Read manual and all safety instructions before using tool. Wear safety glasses with side shields with meet ANSI Z87.1 when driving fasteners. Failure to wear safety glasses could result in severe injury or blindness to tool operator and bystanders. Failure to use genuine paslode fasteners may cause tool damage, personal injury, and voiding of the tool warranty. Protect your eyes.
About
Details
1-1/2 Inch 16 Gauge. For model(s ). 3200-S16P. S200-S16, 900078NT. For best performance use only genuine Paslode staples. Medium crown staple paslode. Easy to drive! Less Jamming! Advanced chisel point design. ISANTA Member. Made in China.
Directions
Heavy duty staple & nailer operator safety instructions. While paslode has designed, produced and inspected all its tools with safety in mind, there are certain basic safety precautions precautions that should always be taken by the operator. These include: Never operate or work in the vicinity of a tool in use without hearing and eye protection devices, including side shields. (2) Never assume the tool is empty. Check the magazine. (3) Never engage in horseplay with the tool, it is not a toy. (4) Never point the tool at anyone or yourself, even if you think it is empty or disconnected. (5) Never operate the tool unless it is in contact with the work piece. (6) Never tamper with, disable, or remove the work contact element. (7) Never leave the work area for any extended period of time without disconnecting the tool from the air line. (8) Never attempt to clear a jam without disconnecting the tool from the air line and removing the remaining fasteners from the tool. (9) Never allow the air pressure to exceed the maximum marked on the tool. Check the air pressure gauge at least twice daily. Do not operate with bottled air or gases (10) Never operate a dirty tool: Clean the tool at least daily and lubricate. If required. (11) In case of tool malfunction: (a) Disconnect from air line immediately and remove all fasteners from magazine. (b) Turn the tool over immediately to the person responsible for repair, or a attach a tag to the air inlet indicating the tool should not be used. (c) Never re-connect to the air line until the tool is thoroughly repaired and inspected. (12) Never carry the tool with the trigger depressed. (13) Never clamp the trigger in a locked operating position. (14) Never load the tool with either the trigger or work contact element depressed. (15) Never use parts or fasteners other than those specifically designed and recommended by Paslode for use in the tool and the work to be done. (16) Never attempt to modify the tool in any way. (17) For detailed information on the tool installation, maintenance and loading Instructions, refer to the tool owners manual. (18) Treat the tool with respect and it will perform safely and reliably for you.
Warnings
Danger: Read manual and all safety instructions before using tool. Wear safety glasses with side shields with meet ANSI Z87.1 when driving fasteners. Failure to wear safety glasses could result in severe injury or blindness to tool operator and bystanders. Failure to use genuine paslode fasteners may cause tool damage, personal injury, and voiding of the tool warranty. Protect your eyes.
Common questions
Learn more about how to place an order here.
Then, when you arrive at the store of your choice, use the Instacart app to notify us. Depending on the store, a shopper or store employee will bring the groceries to your car, or you can pick them up at the designated area.
Learn more about pickup orders here.
- Delivery fees start at $3.99 for same-day orders over $35. Fees vary for one-hour deliveries, club store deliveries, and deliveries under $35.
- Service fees vary and are subject to change based on factors like location and the number and types of items in your cart. Orders containing alcohol have a separate service fee.
- Tipping is optional but encouraged for delivery orders. It's a great way to show your shopper appreciation and recognition for excellent service. 100% of your tip goes directly to the shopper who delivers your order.
With an optional Instacart+ membership, you can get $0 delivery fee on every order over $35 and lower service fees too.
Instacart pickup cost:
- There may be a "pickup fee" (equivalent to a delivery fee for pickup orders) on your pick up order that is typically $1.99 for non-Instacart+ members. Instacart+ membership waives this like it would a delivery fee.
- Pick up orders have no service fees, regardless of non-Instacart+ or Instacart+ membership.
Learn more about Instacart pricing here.
You can set item and delivery instructions in advance, as well as chat directly with your shopper while they shop and deliver your items. You can tell the shopper to:
- Find Best Match: By default, your shopper will use their best judgement to pick a replacement for your item.
- Pick Specific Replacement: You can pick a specific alternative for the shopper to purchase if your first choice is out-of-stock.
- Don't Replace: For items you'd rather not replace, choose "Don't replace" to get a refund if the item is out of stock.
Learn more about instructions for specific items or replacements here.
- Missing items
- Incorrect items
- Damaged items
- Poor replacements
- Early/late orders
If an order never came, or you get someone else's order, you can reach out to Instacart Customer Experience.