FREE delivery or pickup on your first order. Terms apply.FREE delivery or pickup today on your first order. Terms apply.
Instacart home

Fast delivery

Get in as fast as 1 hour

It’s all local

Shop your favorites

Direct chat

Connect with shoppers

Craft and Hobby
Craft Basics
Craft Epoxy and Resin
Use Next and Previous buttons to navigate or jump to a slide with the slide dots.
Permatex Epoxy, Marine, H2 Hold
Permatex Epoxy, Marine, H2 Hold
Permatex Epoxy, Marine, H2 Hold
Permatex Epoxy, Marine, H2 Hold
Permatex Epoxy, Marine, H2 Hold

Permatex Epoxy, Marine, H2 Hold

25 ml
Permatex Epoxy, Marine, H2 Hold

Permatex Epoxy, Marine, H2 Hold

25 ml

100% satisfaction guarantee

Place your order with peace of mind.

MetroSuper CCostcoAdonisWalmartDollaramaSephora CanadaPharmaprixLes Aliments M&MBureau en GrosGiant TigerMichaels CanadaKiehl's CanadaLinen ChestT&T SupermarketMaxi
Kitchen Tropical Mango Veggie Smoothie

About

Details

Permatex Marine H2 Hold Epoxy bonds underwater applications without breaking and can be used above and below the water line. This industrial strength waterproof epoxy is ideal for surfaces exposed to salt or freshwater including portable water tanks, metal fuel tanks, drains, boats and more. Can be used for wet-bonding of ABS, PVC, flexible PVC, CRS, composites, wood and cement. Sticks and cures underwater with a flexible bond that bends without breaking. (Will not bond polyethylene and polypropylene).

• Flexible water-proof adhesive

• Sticks and cures underwater

• Shock and vibration resistant

• Sets in 15 minutes, fixtures in 1 hour and full cure in 24 hours

• Cures to off-white colour

• Shock, vibration and impact resistant

• Permanent strength up to 4000 PSI

• Temperature range: -51°C to 82°C (-60°F to 180°F)

Directions

Directions: 1. For best results roughen surfaces using an abrasive or sandpaper. Surfaces must be clean, dry and free of grease and oil. 2. Remove plastic mixing paddle from center of black plunger. Turn nozzle end up and snap off storage cap (save cap). Pull plunger back 3mm (1/8 inches). Allow air bubbles to rise to top. 3. When ready, push plunger evenly to dispense equal amounts of hardener and resin onto a discardable surface (a piece of cardboard or the plastic package). Pull back plunger to stop flow. 4. Mix thoroughly with the paddle. 5. Apply to surfaces. Adhesive will start to set in 15 minutes and achieve fixture strength in 1 hour. Full cure in 24 hours. 6. Wipe nozzle clean. Replace cap for storage.

Warnings

Caution: Irritant., First Aid Treatment: Contains diglycidyl bisphenol A ether. If swallowed, call a Poison Control Centre or doctor immediately. Do not induce vomiting. If in eyes, rinse with water for 15 minutes. If on skin, rinse well with water., Note: Will not bond to polyethylene or polypropylene plastics. May irritates eyes. May irritate skin. Do not mix with other chemicals. Do not get in eyes. Do not get on skin or clothing. Keep out of reach of children.

About

Details

Permatex Marine H2 Hold Epoxy bonds underwater applications without breaking and can be used above and below the water line. This industrial strength waterproof epoxy is ideal for surfaces exposed to salt or freshwater including portable water tanks, metal fuel tanks, drains, boats and more. Can be used for wet-bonding of ABS, PVC, flexible PVC, CRS, composites, wood and cement. Sticks and cures underwater with a flexible bond that bends without breaking. (Will not bond polyethylene and polypropylene).

• Flexible water-proof adhesive

• Sticks and cures underwater

• Shock and vibration resistant

• Sets in 15 minutes, fixtures in 1 hour and full cure in 24 hours

• Cures to off-white colour

• Shock, vibration and impact resistant

• Permanent strength up to 4000 PSI

• Temperature range: -51°C to 82°C (-60°F to 180°F)

Directions

Directions: 1. For best results roughen surfaces using an abrasive or sandpaper. Surfaces must be clean, dry and free of grease and oil. 2. Remove plastic mixing paddle from center of black plunger. Turn nozzle end up and snap off storage cap (save cap). Pull plunger back 3mm (1/8 inches). Allow air bubbles to rise to top. 3. When ready, push plunger evenly to dispense equal amounts of hardener and resin onto a discardable surface (a piece of cardboard or the plastic package). Pull back plunger to stop flow. 4. Mix thoroughly with the paddle. 5. Apply to surfaces. Adhesive will start to set in 15 minutes and achieve fixture strength in 1 hour. Full cure in 24 hours. 6. Wipe nozzle clean. Replace cap for storage.

Warnings

Caution: Irritant., First Aid Treatment: Contains diglycidyl bisphenol A ether. If swallowed, call a Poison Control Centre or doctor immediately. Do not induce vomiting. If in eyes, rinse with water for 15 minutes. If on skin, rinse well with water., Note: Will not bond to polyethylene or polypropylene plastics. May irritates eyes. May irritate skin. Do not mix with other chemicals. Do not get in eyes. Do not get on skin or clothing. Keep out of reach of children.

Common questions

It's simple. Using the Instacart app or website, shop for products from your store of choice near you. Once you place your order, Instacart will connect you with a personal shopper in your area to shop and deliver your order. Contactless delivery is available with our "Leave at my door" option. You can track your order's progress and communicate with your shopper every step of the way using the Instacart app or website.

Learn more about how to place an order here.

Using the Instacart app or website, select a store of your choice near you that offers pickup, select Pickup, and then select your preferred pickup location from which you'd like to place your order.

Then, when you arrive at the store of your choice, use the Instacart app to notify us. Depending on the store, a shopper or store employee will bring the groceries to your car, or you can pick them up at the designated area.

Learn more about pickup orders here.

Here's a breakdown of Instacart delivery cost:

- Delivery fees start at $3.99 for same-day orders over $35. Fees vary for one-hour deliveries, club store deliveries, and deliveries under $35.
- Service fees vary and are subject to change based on factors like location and the number and types of items in your cart. Orders containing alcohol have a separate service fee.
- Tipping is optional but encouraged for delivery orders. It's a great way to show your shopper appreciation and recognition for excellent service. 100% of your tip goes directly to the shopper who delivers your order.

With an optional Instacart+ membership, you can get $0 delivery fee on every order over $35 and lower service fees too.

Instacart pickup cost:
- There may be a "pickup fee" (equivalent to a delivery fee for pickup orders) on your pick up order that is typically $1.99 for non-Instacart+ members. Instacart+ membership waives this like it would a delivery fee.
- Pick up orders have no service fees, regardless of non-Instacart+ or Instacart+ membership.

Learn more about Instacart pricing here.

When an item you want is out-of-stock at the store, your shopper will follow your replacement preferences.

You can set item and delivery instructions in advance, as well as chat directly with your shopper while they shop and deliver your items. You can tell the shopper to:

- Find Best Match: By default, your shopper will use their best judgement to pick a replacement for your item.
- Pick Specific Replacement: You can pick a specific alternative for the shopper to purchase if your first choice is out-of-stock.
- Don't Replace: For items you'd rather not replace, choose "Don't replace" to get a refund if the item is out of stock.

Learn more about instructions for specific items or replacements here.

If something isn't right, you've got options. In the Instacart app or website, you can report:

- Missing items
- Incorrect items
- Damaged items
- Poor replacements
- Early/late orders

If an order never came, or you get someone else's order, you can reach out to Instacart Customer Experience.